“NiteKap Solar Lighting putting a cost-efficient end to bollard damage and hazards at night”
Retrofit to all structures including concrete and steel top bollards. A 6mm x 75mm dyna bolt will be supplied within the box.
– Drill to 6.5mm
NiteKap Solar Bollard Light Amber LED Flashing Waterproof IP68 Hazard Beacon. Condition is “Brand New”. Sent with Standard Parcel Delivery.
AUSTRALIAN MADE and DESIGNED
Retrofit to Steel and Concrete top Bollards, All Structures.
Included in Box: 6mm Dyna Bolt for concrete and steel top bollards, Standard bolt and nut for silicone base or removable installs.
Unit Specifications
Auto: on at night/off at day (Must connect battery before installing, instructions in box)
Type: Solar Rechargeable Hazard Light
Battery:3.7V Li-Po 900mAh Battery (Built into each unit housing)
Solar Panel: 8V (Mono-SI)
Current: 45mA
Wattage: 3.33 W
Colour: Amber/Orange Flashing
Housing Material/Lens: Polycarbonate (UV resistant)
Lumens: 13cd/Im per LED (6 x LEDs per light)
Waterproof: IP68 with 2 x silicone O-rings to seal housing to bottom plate
Life Expectancy: 5years
Visibility: 1000m+
On/off switch: connect battery connector prior to installation.
Additional Information: Run-time in standard conditions is 24hrs per standard days charge with full sun exposure. Must install solar light in open areas exposed to sun.